Rescue Kit with a block and tackle system (pulleys and ropes specifically assembled to create a mechanical advantage of four) making it easier for a single rescuer to lift a victim. Permits a single rescuer to lift a victim or two rescuers to establish a rappel with ..
292A rescue kit designed for lowering victims from scaffolding. The rescuer attaches the victim the attachment point on the rope and cuts the victim’s lanyard before rappelling to the ground using the Axel descender.Maximum rescue height: 25 m. All components are CE certified PPE...
Rescue Can is a piece of lifesaving equipment used in water rescue. This flotation device can help support the victim’s and rescue’s weight to make a rescue easier. It make of HDPE, and is buoyant enough to support the full weight of a rescuer and several victims...
This rescue tube is approximately L 39″ x 6″ wide x 4″ thick.Printed ” RESCUE TUBE ” lettering on the tube and adjustable shoulder strap with reach assist loop on the end.Rescue tubes are a must-have piece of equipment to ensure the safety of all pool users. These soft, buoyant tubes can be thrown t..
Model:PM-02-LLIIt’s produce fast and easy for immobilizer fracture leg & foreleg bones to prevent further injury to soft tissue & blood vessels & reduce pain. Suitable for use in First Responders, Ambulance & patient transportation.Specifications:Size :Small 18.5″L x 8″W x 26″HMedium..
DuPont™ Tyvek® 400 D garments combine the protection, durability and comfort of DuPont™ Tyvek® fabric on the front and the comfort, softness and breathability of DuPont™ ProShield® 10 fabric on the back. The DuPont™ Tyvek® 400 D garments are suitable for applications where comfort requirements are c..
Model: PM-7B1-SBIt made of high-density Polyethylene material with no discharge contaminator and durable. Can be used with head immobilizer and spider Strap. It is allowed X-Ray translucent.Specifications:Unfolded Size :184(L) x 46(W) x 5(H) cmFloatation Capacity :45kgLoad Bearing :159kgSelf Weight ..
Model: PM-7B2-SBIt made of high-density Polyethylene material with no discharge contaminator and durable. Can be used with head immobilizer and spider Strap. It is allowed X-Ray translucent.Specifications:Unfolded Size :86(L) x 45(W) x 4(H) cmFloatation Capacity :65kgLoad Bearing :159kgSelf Weight :..
Model: PM-1A6B-SBThis spine board with safe belts is made of PE material with no discharge contaminator, and firmness to wear. This plastic spine board can be used as a floatable device. The structure is allowed X-rays because of its completely translucent. It can be used with head immobilize at he ..
This spine board with safe belts is made of PE material with no discharge contaminator, and firmness to wear. This plastic spine board can be used as a floatable device. The structure is allowed X-rays because of its completely translucent. It can be used with head immobilize at he same time. It is ..
Traction Splint Adult / Child_x000D_
Relieve the tissue pressure on fractured leg by mean of traction applied thus avoid further hemorrhages, shock and secondary nervous, vascular, bone and muscular damages. Length adjusted aluminium..
Model: PM-12-NRSThe Neil Robertson stretcher is a heavy duty lifting strecher designed for removing an injured person from spaces where access doors, or hatches are too small to permit the use of regular stretchers. Spaces such as engine-rooms, cargo holds and boiler rooms are a few examples on a ve..
Model: PM-4B1-FSSFrame made of high-strenght aluminium alloy.Designed for gently scoop up the patient and remove from the back without moving the patient.It for tranfer serious fractured patient. Allow extend length up to 214cm.Can be use head immobility at the same time.Specifications:Unfolded Size..
Model: PM-4A1-FSSFrame made of high-strenght aluminum alloy.It for transfer serious fractured patient. Allow extend length up to 214cm.Can be use head immobility at the same time.Specifications:Unfolded Size :214(L) x 52(W) x 7(H) cmFolded Size:167(L) x 42(W) x 7(H) cmLoad Bearing :159kgSelf Weight ..
Model: PM-E5-TTPFrame made of high-strenght aluminium alloy with Thermal-Treated Polymer Shelve will not get too hot or cold for patient comfort.Is ideal for gently slide scoop under victim to support in the position found.Twin safety lock for smooth locking and underlocking. X-Ray translucent.Speci..
Model: PM-1A4-SFFrame made of high-strenght aluminium alloy & aluminium alloy stretcher surface.It is for large acreage fractured patients, and spinal injured.Can be use head immobility at the same timeSpecifications:Unfolded Size :185(L) x 52(W) x 5(H) cmFolded Size :93(L) x 52(W) x 6(H) cmLoad..
Model: PM-1A9Made of Durable Waterproof PVC Coated Nylon canves 2 x 600D, Color: Orange Sewn-in carrying handle for more easy transfer from Sewn-in carrying handle for more easy transfer from high High building, stair case, disaster area.Specifications:Unfolded Size :212(L) x 75(W) cmFolded Size:88(..
Model: PM-5G-WWFrame made of high-strenght aluminium alloy.This stretcher designed for carrying patient in high building with four folded handles & can folded for easy storage. w/2 straps for during transport process.Specifications:Unfolded Size :50(L) x 41(W) x 85(H) cmFolded Size:19(L) x 45(W)..
Model: PM-10-TKTrauma Kit Backpack is made with Nylon 1680D and designed with heavy-duty zipper and reflective stripes.Multi layered cushion pads is strategically locuted to provide comfort & prevent injury to user.*Included 44 list itemsSpecifications:Size :400(L) x 250(W) x 500(H) mmWeight :2...
Model: PM-01-ULIIt’s produce fast and easy for immobilizer fracture arm & forearm bones to prevent further injury to soft tissue & blood vessels & reduce pain. Suitable for use in First Responders, Ambulance & patient transportation.Size :Small 16″L x 11″WMedium 20″L x 11″WLarge 23″L..